Land and data-center sites, North Carolina
Tools

Price per acre, both directions

Enter a price and the acreage to see the price per acre and per square foot. Or start from a target price per acre and see the total.

Fill this in to see the total price for the acreage above.

Price per acre50,000 USD
Price per square foot1.15 USD
Total at target price per acren/a USD

Compare price per usable acre, not per gross acre. A cheap tract with half its land in the floodplain is not cheap.

Quick summary: This calculator turns a total price and an acreage into price per acre and price per square foot, or a target price per acre into a total. It is for buyers and sellers who compare tracts of different sizes. The key point: compare tracts on usable acres, not gross acres.

How it works

Price per acre equals the total price divided by the acreage. Price per square foot divides by the acreage times 43,560, the number of square feet in one acre under NIST Handbook 44.

Compare land on usable acres

Two tracts at the same price per gross acre can differ by half once floodplain, wetlands, and easements come out. Run the usable acreage calculator, Gross acres, minus what you cannot use, first. Then divide the price by usable acres for a fair comparison.

Take action: Before you compare prices, find out how much of each tract you can use. Start with One parcel. Everything the record says, in order.

Key recap

  • Price per acre is the total price divided by the acreage.
  • Price per square foot divides the total price by the acreage times 43,560.
  • Compare tracts on price per usable acre, because constraints can remove a large share of a tract.

Questions

How do I calculate price per acre?

Divide the total price by the number of acres. A 2.5 million dollar tract of 50 acres costs 50,000 dollars per acre.

Why does land near power cost more?

Proximity to transmission and substations, water, and a highway interchange makes a tract useful for industrial and data-center projects, and buyers pay for that.

References

Primary sources cited on this page, in APA style.

  • Baucom, I. C., Benham, E. J., Konijnenburg, J., Lee, G. D., Lippa, K. A., McGuire, J. T., Minnich, L. B., & Williams, J. S. (2025, December). Specifications, tolerances, and other technical requirements for weighing and measuring devices, Appendix C: General tables of units of measurement (NIST HB 44-2026). National Institute of Standards and Technology. https://www.nist.gov/document/2026-nist-handbook-44-appendix-c

Tell us what the project needs

Load, acreage, counties, and timeline. We reply with how we would run the search and where we would start.