Acreage calculator
Enter the length and width of a rectangular tract in feet. The calculator returns the area in acres, square feet, and hectares.
For a rectangle. Real parcels are rarely rectangles; a survey gives the true area.
Quick summary: This calculator finds the area of a rectangular tract in acres, square feet, and hectares from its length and width in feet. It is for landowners and buyers who want a first figure before a survey. The key point: real parcels are rarely rectangles, and a survey gives the area you can rely on.
The formula
Acres = (length in feet × width in feet) ÷ 43,560.
The default above, 660 feet by 66 feet, is the original acre: one furlong by one chain. NIST Handbook 44 defines the acre as 43,560 square feet, the furlong as 660 feet, and the chain as 66 feet.
Irregular shapes
Most parcels are not rectangles. For an irregular tract, split the shape into rectangles and triangles, find each area, and add them. The area of a triangle is half its base times its height. County parcel maps report an acreage for each parcel, and a survey gives the figure you can rely on.
Acreage on paper and acreage you can use
The area of a tract is the starting figure. Floodplain, wetlands, slopes, and easements reduce what can be built on. See the Gross acres, minus what you cannot use.
Take action: For a real parcel, start from the recorded acreage and what the record shows about floodplain and wetlands. Start with Is your parcel FOUND?
Key recap
- Acres equal length times width in feet, divided by 43,560.
- For an irregular tract, split it into rectangles and triangles and add the areas.
- A survey gives the true area, and usable acres are often fewer than total acres.
Questions
How do I calculate acreage?
Multiply the length by the width in feet, then divide by 43,560.
How many feet is one acre on each side?
A square acre is about 208.7 feet on each side.
What are the dimensions of an acre?
An acre is an area, so it has no fixed shape. 660 by 66 feet, about 208.7 by 208.7 feet, and 435.6 by 100 feet are all one acre.
References
Primary sources cited on this page, in APA style.
- Baucom, I. C., Benham, E. J., Konijnenburg, J., Lee, G. D., Lippa, K. A., McGuire, J. T., Minnich, L. B., & Williams, J. S. (2025, December). Specifications, tolerances, and other technical requirements for weighing and measuring devices, Appendix C: General tables of units of measurement (NIST HB 44-2026). National Institute of Standards and Technology. https://www.nist.gov/document/2026-nist-handbook-44-appendix-c
Tell us what the project needs
Load, acreage, counties, and timeline. We reply with how we would run the search and where we would start.